Fix a pool problem
Pick what you are seeing. Each page starts with the fix, then gives exact amounts for your pool.
- How to clear a green poolRaise chlorine to the shock level for your stabilizer (16 ppm at CYA 40) and hold it there until the water clears.
- Why is my pool cloudy, and how do I clear it?Cloudy pool water usually means chlorine ran low, the filter is struggling, or pH and calcium are high.
- Pool cloudy after shockCloudy water after shocking is usually dead algae or calcium from cal-hypo.
- Why is my pool still green after shocking?Two causes: not enough chlorine for your stabilizer level, or metals in the water.
- How to raise pH in a poolAdd soda ash (pH up) to raise pH.
- How to lower pH in a poolAdd muriatic acid or dry acid.
- Why does my pool pH keep going up?Rising pH comes from carbon dioxide leaving the water.
- How to raise alkalinity in a poolAdd baking soda.
- How to lower alkalinity in a poolUse acid to lower pH and alkalinity, then aerate to bring pH back up.
- How to lower CYA (stabilizer) in a poolThe only reliable way is to replace water.
- Chlorine gone by afternoon? Add stabilizerWithout stabilizer, sunlight destroys most of your chlorine in hours.
- Why does my pool smell like chlorine?The sharp pool smell comes from combined chlorine (chloramines), which builds up when free chlorine is too low.
- Too much chlorine in the poolChlorine drops on its own in sunlight.
- Why won't my pool hold chlorine?If chlorine drops fast, it is either sunlight (low stabilizer) or something in the water eating it (algae, debris).
- Why is my pool foamy?Foam comes from soap, lotion and some algaecides, and is worse in soft water.
- Metal stains and brown or teal waterBrown, rust or reddish stains usually mean iron; teal or blue-green means copper.
- White scale and calcium buildupScale forms when pH, alkalinity and calcium are high together.
- How to raise calcium hardnessAdd calcium chloride.
- How much salt to add to a salt poolMost salt cells want about 3,000 to 3,400 ppm.
- Why is pH always high in my salt pool?Salt cells make bubbles that push carbon dioxide out, so pH rises.
- Salt pool chlorine lowCheck salt level, cell output, pump hours, water temperature, stabilizer and cell scale before blaming the cell.
- What to do with your pool after heavy rainRain dilutes chlorine and alkalinity, washes in debris and can overflow the pool.
- Opening your pool: what to add and in what orderTop up, start the equipment, test everything, then chlorine first.
- Closing your pool for winterBalance the water, raise chlorine, clean everything, then lower the water and winterize lines.
- How to get rid of yellow (mustard) algaeMustard algae needs a higher shock level, about 60% of CYA (24 ppm at CYA 40), plus cleaning everything that went in the pool.
- How to get rid of black algaeBlack algae roots into plaster.
- Why does the pool water burn my eyes?Stinging eyes usually come from pH out of range or combined chlorine (chloramines), more often than from too much chlorine.
- First chemicals for a new or freshly filled poolTest the fill water, then add stabilizer, chlorine, and adjust pH and alkalinity.