Otterly

How to raise calcium hardness

Add calcium chloride. Raising calcium hardness 50 ppm in a 10,000 gallon pool takes about 6 lb of 77% flake. Plaster and pebble pools need 200 to 400 to keep the surface from etching; vinyl and fiberglass pools can run lower.

ChangeCalcium chloride 77%
Raise calcium 25 ppm3 lb
Raise calcium 50 ppm6 lb
Raise calcium 100 ppm12 lbin 2 rounds of 6 lb
Raise calcium 150 ppm18 lb 1 ozin 2 rounds of 9 lb
Raise calcium 200 ppm24 lb 1 ozin 3 rounds of 8 lb

For a 10,000 gallon pool. Calcium chloride for other sizes.

Step by step

  1. Test calcium hardness.
  2. Pre-dissolve the calcium chloride in a bucket of pool water. The bucket gets hot; add the flakes to the water slowly.
  3. Pour around the pool with the pump running.
  4. Do not add calcium within 12 hours of baking soda or soda ash.

Your exact amounts (example numbers filled in)

Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.

Does a vinyl pool need calcium?

Not for the liner. Some owners keep a little calcium (over 100 to 150) because very soft water foams more, especially in spas.

Common questions

What happens if calcium is too low?

In plaster pools, water pulls calcium from the surface, leaving it rough and etched. Grout can soften too.

Is calcium increaser the same as calcium chloride?

Yes, nearly every calcium increaser is calcium chloride. Check the percentage on the bag.