How to lower CYA (stabilizer) in a pool
Replace water. No chemical removes cyanuric acid reliably. To go from CYA 100 to 40, drain and refill about 60% of the pool (from 80 to 50, about 38%). Until then, chlorine must stay higher to work, since stabilizer slows it down.
Step by step
- Test CYA with a fresh reagent or strip. Readings above 100 on many kits are guesses; dilute a sample 50/50 with tap water and double the result.
- Work out the drain amount in the calculator above.
- Drain in stages if you have a vinyl liner or a high water table. Do not empty a vinyl pool or an in-ground pool without professional advice.
- Refill, retest everything, and rebalance.
- Switch to liquid chlorine or a salt cell so CYA stops climbing.
Your exact amounts (example numbers filled in)
Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.
Where high CYA comes from
Trichlor tablets and dichlor shock both add stabilizer every time you use them. Over a summer of tablets, CYA can climb from 40 to well over 100. That is why chlorine seems to stop working: at high CYA you need much more free chlorine to get the same effect.
What to do if you cannot drain yet
Keep free chlorine at the level the chart calls for at your CYA. That costs more chlorine, but it keeps algae away until you can replace water. See the chlorine and CYA chart.
Common questions
How do I lower CYA without draining the pool?
There is no dependable way. CYA reducer products use bacteria and often do little. Splash-out and backwashing lower it slowly. Replacing part of the water is the method that works every time.
What happens if CYA is too high?
Chlorine still reads normal on a test, but most of it is held in reserve and works slowly. Algae can grow at chlorine levels that would be plenty at a lower CYA.
Do CYA reducer products work?
Results are mixed. They rely on bacteria that need specific conditions, and many pool owners see little change. Replacing water always works.
What is too high for CYA?
For a chlorine pool, above about 50 to 60 starts needing a lot of chlorine. For a salt pool, above about 80 to 90.
Does rain lower CYA?
Only if the pool overflows and you lose water. Evaporation leaves CYA behind.