Otterly

How much baking soda to add to your pool

To raise alkalinity 10 ppm in 10,000 gallons, add 1 lb 6 oz of baking soda. Raising it 30 ppm takes 4 lb 3 oz.

Pool size+10 ppm+20 ppm+30 ppm+50 ppm
1,000 gal1,000 gal2.2 oz4.5 oz6.7 oz11.2 oz
2,000 gal2,000 gal4.5 oz9 oz13.5 oz1 lb 6 oz
3,000 gal3,000 gal6.7 oz13.5 oz1 lb 4 oz2 lb 2 oz
4,000 gal4,000 gal9 oz1 lb 2 oz1 lb 11 oz2 lb 13 oz
5,000 gal5,000 gal11.2 oz1 lb 6 oz2 lb 2 oz3 lb 8 oz
6,000 gal6,000 gal13.5 oz1 lb 11 oz2 lb 8 oz4 lb 3 oz
8,000 gal8,000 gal1 lb 2 oz2 lb 4 oz3 lb 6 oz5 lb 10 oz
10,000 gal10,000 gal1 lb 6 oz2 lb 13 oz4 lb 3 oz7 lb
12,000 gal12,000 gal1 lb 11 oz3 lb 6 oz5 lb 1 oz8 lb 7 oz
15,000 gal15,000 gal2 lb 2 oz4 lb 3 oz6 lb 5 oz10 lb 8 oz
20,000 gal20,000 gal2 lb 13 oz5 lb 10 oz8 lb 7 oz14 lb
25,000 gal25,000 gal3 lb 8 oz7 lb10 lb 8 oz17 lb 8 oz
30,000 gal30,000 gal4 lb 3 oz8 lb 7 oz12 lb 10 oz21 lb
10' x 30"1,178 gal2.6 oz5.3 oz7.9 oz13.2 oz
12' x 30"1,696 gal3.8 oz7.6 oz11.4 oz1 lb 3 oz
15' x 42"3,974 gal8.9 oz1 lb 2 oz1 lb 11 oz2 lb 13 oz
15' x 48"4,636 gal10.4 oz1 lb 5 oz1 lb 15 oz3 lb 4 oz
16' x 48"5,275 gal11.8 oz1 lb 8 oz2 lb 3 oz3 lb 11 oz
18' x 48"6,676 gal15 oz1 lb 14 oz2 lb 13 oz4 lb 11 oz
18' x 52"7,312 gal1 lb2 lb 1 oz3 lb 1 oz5 lb 2 oz
21' x 52"9,953 gal1 lb 6 oz2 lb 13 oz4 lb 3 oz7 lb
24' x 52"13,000 gal1 lb 13 oz3 lb 10 oz5 lb 7 oz9 lb 2 oz
27' x 52"16,453 gal2 lb 5 oz4 lb 10 oz6 lb 15 oz11 lb 8 oz
30' x 52"20,312 gal2 lb 14 oz5 lb 11 oz8 lb 9 oz14 lb 4 oz
15' x 30' x 52" oval10,156 gal1 lb 7 oz2 lb 14 oz4 lb 4 oz7 lb 2 oz
18' x 33' x 52" oval13,406 gal1 lb 14 oz3 lb 12 oz5 lb 10 oz9 lb 6 oz

Plain baking soda (sodium bicarbonate) and pool-store Alkalinity Up are the same chemical. Above-ground gallons assume water about 6 inches below the top.

Your pool, your readings

Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.

How to add baking soda

  1. Broadcast it over the deep end with the pump running.
  2. It may cloud the water for a few minutes.
  3. Retest alkalinity and pH after a few hours.
  4. Keep it 12 hours apart from calcium chloride.

By pool size

Common questions

How much baking soda per 10,000 gallons?

1 lb 6 oz for every 10 ppm of alkalinity.

Will baking soda raise pH?

A little. If pH is also low, add baking soda first and retest before using soda ash.