Otterly

Pool cloudy after shock

Cloudiness after a shock is usually dead algae the filter has not caught yet, or calcium from cal-hypo shock when pH is high. Keep chlorine at the shock level, run and clean the filter, and lower pH if it is above 7.8. Most pools clear in one to three days.

Step by step

  1. Test chlorine. If it has dropped below the shock level for your CYA, add more. Letting it fall now lets the algae come back.
  2. Clean the filter. Dead algae clogs it fast; a sand filter may need a backwash every day during a cleanup.
  3. Check pH. If it is high and you used cal-hypo, calcium is likely coming out of the water. Lower pH with acid.
  4. Brush the walls and floor, then vacuum what settles.
  5. Wait it out with the pump running. Add clarifier only once chlorine is holding.

Your exact amounts (example numbers filled in)

Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.

Signs it is still algae

If chlorine keeps dropping fast, or the water turns green again, the algae is still alive. Go back to holding the shock level. The overnight chlorine loss test tells you when you are done: test at sunset, test at sunrise, and you want a drop of 1 ppm or less.

Common questions

Should I shock again if the pool is cloudy after shocking?

If chlorine has fallen below the shock level for your CYA, yes, top it back up. If chlorine is holding and the water is only hazy, give the filter time.

Why is my pool cloudy after using shock bags?

Most bagged shock is cal-hypo, which adds calcium. With high pH or high calcium already in the water, some of it comes out as fine white particles.