Otterly

How to lower alkalinity in a pool

Add acid, then aerate. Acid lowers both alkalinity and pH; aeration brings pH back up without bringing alkalinity back. Lowering alkalinity 10 ppm in 10,000 gallons takes about 3 cups of 31.45% muriatic acid. Repeat until alkalinity is in range.

Step by step

  1. Test alkalinity and pH.
  2. Add acid in the deep end with the pump running. Do not go below pH 7.0.
  3. Aerate: point return jets up, run waterfalls or a fountain, or use a spa spillover. pH climbs; alkalinity stays down.
  4. When pH is back up near 7.6, add acid again. Each cycle takes a day or so.
  5. Stop when alkalinity reaches your target.

Your exact amounts (example numbers filled in)

Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.

Why bother

High alkalinity is the reason pH climbs every few days in a lot of pools. Bringing it down to the lower part of the range means less acid over the season, not more.

Common questions

How do I lower alkalinity without lowering pH?

You cannot do it in one step: acid lowers both. Lower both with acid, then raise pH back up with aeration, which leaves alkalinity where it is.

How do I lower alkalinity naturally?

Rain and fresh water dilute it slowly, and aeration alone does not lower it. The acid-and-aerate method is the reliable way.

Will lowering alkalinity lower pH?

Yes. Any acid that lowers alkalinity also drops pH, often sharply. That is why the method alternates acid with aeration.

Is high alkalinity dangerous?

No, but it causes rising pH and, with high calcium, cloudy water and scale.