Metal stains and brown or teal water
Brown, rust or reddish stains (or water that turns brown after you shock) usually mean iron. Teal, blue-green or dark stains usually mean copper. Rub a vitamin C tablet on a stain: if it lightens, it is metal. Remove stains with an ascorbic acid treatment, then keep metals in check with a metal sequestrant, dosed from its label.
Step by step
- Do the vitamin C test on a stain. If it lightens in under a minute, it is metal. If not, it may be organic (leaves) or scale.
- Find the source: well water, copper algaecide, a copper ionizer, or a heater corroded by low pH.
- For an ascorbic acid treatment, follow the product directions. Most start with chlorine lowered close to zero, since chlorine eats ascorbic acid.
- Add a metal sequestrant and keep up its maintenance dose.
- Raise chlorine back to normal slowly over a day or two.
Your exact amounts (example numbers filled in)
Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.
Filling with well water
Well water often carries iron. Use a hose filter made for metals when you fill or top up, and add sequestrant before chlorine so the iron does not drop out as brown stain.
Keep pH in range
Low pH corrodes copper heat exchangers, and the copper ends up on the walls. Keeping pH at 7.2 or above protects the heater.
Common questions
Why did my pool turn brown after shocking?
Iron in the water. Chlorine oxidizes dissolved iron, which shows up as brown or rust-colored water. Use a sequestrant and filter it out; do not keep shocking.
Will shocking remove metal stains?
No. More chlorine can make metal stains worse.