How to lower pH in a pool
Add muriatic acid or dry acid. Lowering pH from 8.0 to 7.5 in a 10,000 gallon pool with alkalinity at 100 takes about 3 cups of 31.45% muriatic acid. Pour it slowly into the deep end with the pump running, and keep it at least 30 minutes apart from chlorine.
| Change | Muriatic acid 31.45% | Muriatic acid 14.5% (low-fume) |
|---|---|---|
| Lower pH 7.8 → 7.5 | 2 cups (15 fl oz) | 1 qt (33 fl oz)in 2 rounds of 2 cups (16 fl oz) |
| Lower pH 8.0 → 7.5 | 3 cups (24 fl oz) | 1 qt + 2½ cups (52 fl oz)in 2 rounds of 3½ cups (26 fl oz) |
| Lower pH 8.2 → 7.5 | 1 qt + ½ cup (34 fl oz)in 2 rounds of 2 cups (17 fl oz) | 2 qt + 1 cup (74 fl oz)in 3 rounds of 3 cups (25 fl oz) |
| Lower pH 8.4 → 7.5 | 1 qt + 2 cups (46 fl oz)in 2 rounds of 3 cups (23 fl oz) | 3 qt + ½ cup (100 fl oz)in 4 rounds of 3 cups (25 fl oz) |
| Lower pH 8.0 → 7.2 | 1 qt + ½ cup (36 fl oz)in 2 rounds of 2½ cups (18 fl oz) | 2 qt + 2 cups (78 fl oz)in 3 rounds of 3½ cups (26 fl oz) |
| Lower alkalinity | Muriatic acid 31.45% | Muriatic acid 14.5% (low-fume) |
|---|---|---|
| Lower alkalinity 10 ppm | 3 cups (26 fl oz) | 1 qt + 3½ cups (61 fl oz)in 2 rounds of 1 qt (30 fl oz) |
| Lower alkalinity 20 ppm | 1 qt + 2½ cups (51 fl oz)in 2 rounds of 3 cups (26 fl oz) | 3 qt + 3 cups (121 fl oz)in 4 rounds of 1 qt (30 fl oz) |
| Lower alkalinity 30 ppm | 2 qt + 1½ cups (77 fl oz)in 3 rounds of 3 cups (26 fl oz) | 1 gal + 1 qt + 3 cups (182 fl oz)in 6 rounds of 1 qt (30 fl oz) |
| Lower alkalinity 50 ppm | 1 gal (128 fl oz)in 4 rounds of 1 qt (32 fl oz) | 2 gal + 1 qt + 2 cups (303 fl oz)in 10 rounds of 1 qt (30 fl oz) |
For a 10,000 gallon pool at alkalinity 100. Muriatic acid for other sizes.
Step by step
- Test pH and alkalinity. The acid dose depends on both.
- Turn the pump on. Wear eye protection and gloves and stand upwind.
- Pour the acid slowly into the deep end, close to the water surface, away from the skimmer and the walls. Never add water to acid.
- Wait at least 30 minutes before adding chlorine or anything else, then retest.
- For a large drop, the calculator splits the dose into rounds. Add one round, retest, then add the next.
Your exact amounts (example numbers filled in)
Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.
Why pH keeps climbing
Splashing, waterfalls, spa spillovers and salt cells push carbon dioxide out of the water, and pH rises as it leaves. High alkalinity makes this worse because it holds more carbon dioxide to lose. Fresh plaster also raises pH for its first months. If you are adding acid every few days, lower alkalinity toward the bottom of its range.
Muriatic or dry acid?
Both work. Muriatic acid is cheaper per dose and adds only chloride. Dry acid is easier to store and has no fumes, but it adds sulfate, which builds up over seasons. The calculator handles either one.
Common questions
Can I lower pH with vinegar?
Not in any practical way. Household vinegar is weak, so a pool would need gallons of it, and it adds organic material that uses up chlorine. Muriatic acid or dry acid is cheaper and cleaner.
How do I lower pH quickly?
Muriatic acid works within an hour with the pump running. Add the dose, wait 30 minutes or more, and retest.
Can I swim after adding muriatic acid?
Wait at least 30 minutes with the pump running so it mixes, then swim if pH is in range.
Can I add acid and chlorine at the same time?
No. Add one, wait at least 30 minutes with the pump running, then add the other. Mixed directly, they release chlorine gas.
What pH is too high for a pool?
Above 7.8 chlorine works noticeably slower and calcium scale becomes more likely. Aim for 7.5, and treat anything over 7.8.