Opening your pool: what to add and in what order
Top up the water, start the equipment, then test before you add anything. Get chlorine up first (to the shock level if the water is green or cloudy), then correct alkalinity, pH, calcium and stabilizer. Enter your results in the calculator below and it puts them in order.
Step by step
- Clean the cover off and remove it. Do not let the debris on top fall in.
- Fill to mid-skimmer, reconnect equipment, and start the pump. Check for leaks.
- Test chlorine, pH, alkalinity, CYA and calcium.
- Add chlorine. If the water is green or cloudy, raise it to the shock level and hold it.
- Adjust alkalinity, then pH, then calcium and stabilizer, waiting between additions.
- Brush the whole pool and run the filter around the clock for the first few days.
Your exact amounts (example numbers filled in)
Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.
Do you need an opening kit?
Kits are mostly shock and a small bottle of algaecide or clarifier, priced at a premium. Liquid chlorine, baking soda and acid, in the amounts the calculator gives, do the same job and fit your actual readings.
Common questions
How long after opening can I swim?
When the water is clear, chlorine is in range for your CYA, and pH is between 7.2 and 7.8.
Why is my pool green when I opened it?
Chlorine ran out over the winter. Follow the green pool steps and hold the shock level.