Otterly

Why does my pool pH keep going up?

pH rises as carbon dioxide escapes from the water. Anything that churns the surface speeds that up: waterfalls, spillovers, jets pointed up, salt cells. High alkalinity keeps feeding it. Lower alkalinity toward the bottom of its range (about 60 to 80, or 50 to 70 for salt pools) and the drift slows down.

Step by step

  1. Test alkalinity. If it is above 100 to 120, that is the main lever.
  2. Lower alkalinity with acid, then aerate to bring pH back up without raising alkalinity. Repeat until alkalinity is where you want it.
  3. Point return jets down and run waterfalls less while you correct it.
  4. In a salt pool, keep alkalinity at the lower end of the range.

Your exact amounts (example numbers filled in)

Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.

The acid-and-aerate method

Acid lowers both pH and alkalinity. Aeration raises pH but leaves alkalinity alone. So: add acid to drop pH to about 7.2, then aerate (fountains, jets aimed up, a spa spillover) until pH climbs back to 7.6 or so, then add acid again. Each cycle lowers alkalinity a bit more.

Common questions

Does liquid chlorine raise pH?

Barely, over time. Liquid chlorine raises pH when added, but most of that rise reverses as the chlorine is used up. Steady pH climbs are usually from carbon dioxide loss.

Is a pH that keeps rising a problem?

It is mostly a nuisance. Above 7.8 chlorine works slower and scale can form, so it needs regular acid until alkalinity is lowered.