Otterly

What should calcium hardness be in a pool?

For plaster and pebble pools, keep calcium hardness 200 to 400 ppm (aim 300). Vinyl and fiberglass pools can run 130 to 400 ppm. Too low and plaster etches; too high, with high pH, and scale forms. Raise it with calcium chloride; lower it only by replacing water.

ChangeCalcium chloride 77%
Raise calcium 25 ppm3 lb
Raise calcium 50 ppm6 lb
Raise calcium 100 ppm12 lbin 2 rounds of 6 lb
Raise calcium 150 ppm18 lb 1 ozin 2 rounds of 9 lb
Raise calcium 200 ppm24 lb 1 ozin 3 rounds of 8 lb

Calcium chloride 77% for 10,000 gallons. Other sizes.

Try it with your numbers

Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.

What calcium hardness does

Water dissolves calcium until it is saturated. In a plaster pool with too little calcium, the water takes it from the plaster, leaving it rough and pitted. With too much, plus high pH or heat, calcium comes out as white scale on tile and inside heaters and salt cells. The LSI puts calcium, pH, alkalinity and temperature together.

What causes high calcium

Hard fill water, evaporation (calcium stays behind as water leaves and gets topped up), and cal-hypo shock, which adds calcium every dose. Replacing part of the water is the only way to lower it; the calculator gives the percentage.

Common questions

What is calcium hardness in a pool?

The amount of dissolved calcium in the water, measured in ppm.

Is a calcium hardness increaser the same as calcium chloride?

Yes. Check the percentage on the bag; the tables assume 77% flake.

What should calcium hardness be in a hot tub?

The calculator uses 130 to 400 ppm for spas.