Otterly

10' x 30" round above-ground pool: gallons and chemical amounts

A 10' x 30" round above-ground pool holds about 1,178 gallons filled to 6 inches below the top (2 ft of water). In 1,178 gallons, 1 ppm of chlorine takes 1.2 fl oz of 12.5% liquid chlorine, pH 8.0 to 7.5 takes 2.8 fl oz of muriatic acid, and 10 ppm of alkalinity takes 2.6 oz of baking soda.

ChangeChemicalAmount
Raise chlorine 1 ppmLiquid chlorine 12.5%1.2 fl oz
Raise chlorine 5 ppmLiquid chlorine 12.5%6 fl oz
Shock: 0 → 16 ppm (CYA 40)Liquid chlorine 12.5%2½ cups (19 fl oz)
Raise chlorine 5 ppmCal-hypo shock 73%1.1 oz
Lower pH 8.0 → 7.5Muriatic acid 31.45%2.8 fl oz
Lower pH 8.0 → 7.5Dry acid 93%3.8 ozin 2 rounds of 1.9 oz
Raise pH 7.2 → 7.5Soda ash0.7 oz
Raise alkalinity 10 ppmBaking soda2.6 oz
Lower alkalinity 10 ppmMuriatic acid 31.45%3 fl oz
Raise CYA 10 ppmStabilizer1.6 oz
Raise calcium 25 ppmCalcium chloride 77%5.7 oz
Salt for a new fill (0 → 3,100 ppm)Pool salt30 lb 7 oz

Computed for 1,178 gallons. pH rows assume alkalinity 100. Shock row uses stabilizer 40 (shock level 16 ppm).

Doses for your 10' x 30" pool

Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.

How the gallons are worked out

Round pool: diameter × diameter × 0.785 × water depth × 7.5 gallons per cubic foot. Oval: length × width × 0.785 × depth × 7.5. Above-ground pools are usually filled to about 6 inches below the top rail, so a 30-inch wall holds about 2 feet of water. If yours is filled higher or lower, enter your own depth in the gallons helper below.

Vinyl liner notes

Nearly all above-ground pools have vinyl liners, which cannot etch, so calcium matters less than in plaster pools. Keep pH from falling below 7.2: low pH makes liners stretch and wrinkle. Pre-dissolve granular chemicals so they do not sit on the liner.

Chemical pages for this size

Other above-ground sizes

Common questions

How many gallons is a 10' x 30" pool?

About 1,178 gallons, filled to about 6 inches below the top.

How much chlorine for a 10' x 30" pool?

Each 1 ppm of chlorine takes 1.2 fl oz of 12.5% liquid chlorine. Keep free chlorine at the level your stabilizer calls for (3 to 7 ppm at CYA 40).

How much shock for a 10' x 30" pool?

To clear algae at CYA 40, raise chlorine to 16 ppm: 2½ cups of 12.5% liquid chlorine from zero, then keep it there.