How much muriatic acid for a 10,000 gallon pool
With alkalinity near 100, lowering pH from 8.0 to 7.5 in 10,000 gallons takes 3 cups of 31.45% muriatic acid. From 7.8 to 7.5 takes 2 cups.
| Change | Muriatic acid 31.45% | Muriatic acid 14.5% (low-fume) |
|---|---|---|
| Lower pH 7.8 → 7.5 | 2 cups (15 fl oz) | 1 qt (33 fl oz)in 2 rounds of 2 cups (16 fl oz) |
| Lower pH 8.0 → 7.5 | 3 cups (24 fl oz) | 1 qt + 2½ cups (52 fl oz)in 2 rounds of 3½ cups (26 fl oz) |
| Lower pH 8.2 → 7.5 | 1 qt + ½ cup (34 fl oz)in 2 rounds of 2 cups (17 fl oz) | 2 qt + 1 cup (74 fl oz)in 3 rounds of 3 cups (25 fl oz) |
| Lower pH 8.4 → 7.5 | 1 qt + 2 cups (46 fl oz)in 2 rounds of 3 cups (23 fl oz) | 3 qt + ½ cup (100 fl oz)in 4 rounds of 3 cups (25 fl oz) |
| Lower pH 8.0 → 7.2 | 1 qt + ½ cup (36 fl oz)in 2 rounds of 2½ cups (18 fl oz) | 2 qt + 2 cups (78 fl oz)in 3 rounds of 3½ cups (26 fl oz) |
| Lower alkalinity | Muriatic acid 31.45% | Muriatic acid 14.5% (low-fume) |
|---|---|---|
| Lower alkalinity 10 ppm | 3 cups (26 fl oz) | 1 qt + 3½ cups (61 fl oz)in 2 rounds of 1 qt (30 fl oz) |
| Lower alkalinity 20 ppm | 1 qt + 2½ cups (51 fl oz)in 2 rounds of 3 cups (26 fl oz) | 3 qt + 3 cups (121 fl oz)in 4 rounds of 1 qt (30 fl oz) |
| Lower alkalinity 30 ppm | 2 qt + 1½ cups (77 fl oz)in 3 rounds of 3 cups (26 fl oz) | 1 gal + 1 qt + 3 cups (182 fl oz)in 6 rounds of 1 qt (30 fl oz) |
| Lower alkalinity 50 ppm | 1 gal (128 fl oz)in 4 rounds of 1 qt (32 fl oz) | 2 gal + 1 qt + 2 cups (303 fl oz)in 10 rounds of 1 qt (30 fl oz) |
For 10,000 gallons. Full-strength muriatic acid is 31.45%. Low-fume versions are often 14.5%, so you need about twice as much.
Exact dose for 10,000 gal
Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.
How to add muriatic acid
- Wear eye protection and gloves and stand upwind.
- With the pump running, pour slowly into the deep end, close to the water, away from walls and the skimmer.
- Never add water to acid, and never pour acid into a bucket of chlorine water.
- Wait 30 minutes before adding chlorine; retest pH after an hour.
Muriatic acid for other pool sizes
Common questions
How much muriatic acid for a 10,000 gallon pool?
It depends on pH and alkalinity. At alkalinity 100, pH 8.0 to 7.5 takes 3 cups; lowering alkalinity by 10 ppm takes 3 cups.
How much muriatic acid can I add at one time?
About 1 qt of 31.45% acid per 10,000 gallons per round, which is 1 qt for 10,000 gallons. Bigger doses are split into rounds with a retest between each; the calculator does this for you.
Can I add muriatic acid and chlorine on the same day?
Yes, but at least 30 minutes apart with the pump running, poured in different spots.